HDL-240 Compact data logger with an extensive set of inputs-outputs

Features

Analogue single-ended @12 bit:

Differential @12 bit, gain 100:

K-type thermocouple @12 bit:

NTC-PT1000 temperature sensor (SW selectable):

Internal temperature sensor:

VRS Pick-up, Hall or Rate sensor (SW selectable):

Hall effect or Rate sensor (SW selectable):

Lap trigger pull-up and pull-down (SW selectable):

“Code Load” enable pin:

Voltage references (5.0 V 70 mA max):

Half-Bridge, high-side/ and low-side outputs:

CAN 2.0B lines (1 Mbit/s, SW selectable termination):

Ethernet lines (100 Mbit/s):

USB 2.0 full speed (for USB solid state drives):

RS 232:

Processor (32 bit CPU):

Flash:

2 MByte

RAM memory (internal):

256 MByte

RAM memory (external):

32 MByte

E2PROM:

64 kByte

Time keeper (with backup battery):

Flash disk memory:

32 GByte

Logged channels:

1,024

Logging rate:

200 kByte/s

Sampling rate:

up to 2,000 Hz

Power supply:

8 to 16 V

Internal operating temperature range:

-20 to 85 °C

Protection class:

IP65

Connectors:

Dimensions without connector:

90 x 110 x 24 mm

Weight (approx.):

200 g

Product Overview

Compact data logger with an extensive set of inputs-outputs

MAIN FEATURES

• 32 GByte internal disk for data recording
• Data recording on USB pen-drive
• 1,024 logged channels
• 200 kByte/s logging rate
• Sampling rates up to 2,000 Hz
• 2 CAN 2.0B lines
• 4 Ethernet 100 Mbit/s lines
• Tri-axial 16g accelerometer
• 2 green/red LEDs on top for visible logger status feedback

DESCRIPTION

The HDL-240 is the latest model in the range of Marelli data loggers, offering increased logging performance in a smaller and lighter package. It is a versatile data acquisition unit, specifically developed for racing applications which require high resolution data from a large number of channels, either supplied from internal measurements, via CAN, or via Ethernet lines. It can work not only in standalone mode but also seamlessly integrates with Marelli dashboards. Two bi-color LEDs provide at-a-glance information on logger status and diagnostic information. The unit can also log to external USB mass storage (up to 32 GByte), and is compatible with the Marelli WinTAX data analysis tool and SYSMA setup tool.