Accessories
-
Ecumaster
ECUMaster VANOS Low Side to High Side Module
This module is dedicated to EMU CLASSIC and changes low side outputs (eg. AUX outputs) to high side.
MSRP:Was:Now: $140.00 -
Ecumaster
ECUMaster Fluid Temperature Sensor (oil, water, etc.), 1/8 NPT
ECUMaster Oil Temperature Sensor Kits are perfect for customers using the ECUMaster EMU standalone that would like to monitor oil temperature or fluid temperature. The ECUMaster Oil Temperature Sensor kit can also be used with the DET3. ECUMaster Oil...
MSRP:Was:Now: $49.00 -
Ecumaster
Infrared CAN Tire Temperature Camera
ECUMaster CAN infrared tire temperature cameras are a valuable addition to any racing program. Each camera provides temperature readings for 16 points across the tire, and transmits this information over CAN Bus. The ADU dash display can display a...
MSRP:Was:Now: $469.00 -
Ecumaster
Wheel Speed to CAN Module
The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS. The module can measure signals from different types of sensors, or standard digital signals. Thanks to differential...
MSRP:Was:Now: $469.00 -
Ecumaster
Dual H-Bridge Module
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages. Voltage range: 6V - 28V...
MSRP:Was:Now: $499.00 -
Ecumaster
CAN Switchboard Module V3
Small PCB module to transmit 8 switched inputs and 8 analog inputs (from rotary potentiometers) over CAN network, i.e. for steering wheel buttons, rotary switches and indicators.
MSRP:Was:Now: $219.00 -
Ecumaster
ECUMaster CAN Expansion Module
The ECUMaster CAN bus expansion module plugs into the 5 pin serial port on the standard EMU and adds the capability to communicate over CAN bus, as well as adding 4 analog inputs. CAN bus allows for communication with other expansion modules, aftermarket...
MSRP:Was:Now: $149.00 -
Ecumaster
Drive By Wire Module for EMU
The ECUMaster Drive By Wire Control module allows for the use of a DBW throttle with the ECUMaster EMU. The EMU Black has DBW control built in, so this product is only for use with the standard EMU. A full list of currently supported throttles can be...
MSRP:Was:Now: $249.00 -
Ecumaster
Bluetooth Adapter for ECUMaster EMU Black (CAN Bus)
The CAN Bus Bluetooth Adapter for the ECUMaster EMU Black allows for wireless display of ECU parameters on an Android tablet or phone. This adapter is for use with the CAN version of the EMU (6 pins on the expansion port as opposed to 5 pins on the...
MSRP:Was:Now: $119.00 -
Ecumaster
Bluetooth Adapter for ECUMaster EMU/Classic (Serial)
The Bluetooth Adapter for the ECUMaster EMU allows for wireless display of ECU parameters on an Android tablet or phone. The Android app allows the customer to customize the style and size of the gauges, as well as deciding which parameters to display...
MSRP:Was:Now: $119.00 -
Ecumaster
ECUMaster EDL-1 Serial Datalogger
Serial Datalogger with bluetooth capability, records all EMU/EMU Black log channels to SD card
MSRP:Was:Now: $209.00 -
Ecumaster
ECUMaster 8 position switch
8 Position Rotary Switches can be used to control various ECU functions such as Traction Control and Boost Control settings. Installation is simple, just connect 5V supply, sensor ground, and the output signal. Rotary switches can be connected to any...
MSRP:Was:Now: $45.00