Harnesses
-
Autosport labs
-40 to 150C Linear temperature sensor with plug and play harness
MSRP:Was:Now: $74.95 -
Autosport labs
150 bar / 2175 PSI pressure sensor with plug and play harness
MSRP:Was:Now: $129.95 -
-
-
-
-
-
Autosport labs
-40 to 150C Linear temperature sensor with plug and play harness
The Autosport Labs Linear Temperature Sensor offers a linear response of 10mv/C for easy calibration with a simple conversion formula. Only ground, 5v, and output connections are required, with no pullup resistor needed – similar to other active...
MSRP:Was:Now: $74.95 -
Autosport labs
150 bar / 2175 PSI pressure sensor with plug and play harness
150 bar / 2175 PSI pressure sensor with M8 plug and play harness connector 2 Meter length 1/8″ NPT port Pinout: Black / Pin 4 : signal Brown / Pin 1: Ground Blue / Pin 3: 5V Full Harness Specifications
MSRP:Was:Now: $129.95 -
Autosport labs
10 bar / 150 PSI pressure sensor with plug and play harness
10 bar / 150 PSI pressure sensor with M8 plug and play harness connector 2 Meter length 1/8″ NPT port Pinout: Black / Pin 4 : signal Brown / Pin 1: Ground Blue / Pin 3: 5V Full Harness Specifications
MSRP:Was:Now: $89.95 -
Autosport labs
Analog / Digital Sensor Extension
Analog / Digital sensor extension M8 Male to M8 Female Available in multiple lengths. Multiple cables can be linked end-to-end. 1 Meter: ASL_M8_SENSOR_EXTENSION_1M 2 Meters: ASL_M8_SENSOR_EXTENSION_2M 3 Meters: ASL_M8_SENSOR_EXTENSION_3M 4 Meters:...
MSRP:Was:Now: $17.95 - $23.95 -
Autosport labs
4-channel Analog/Digital sensor splitter
Expands 4 Analog / Digital channels to individual M8 sensor connections. M8 8P Male connection for AnalogX or GPIOx 4x M8 3P Analog/Digital sensor connection Commonly used to connect AnalogX or GPIOx to 4 individual analog / digital sensors for a plug...
MSRP:Was:Now: $34.95 -
Autosport labs
RaceCapture RJ45 to Dual CAN bus link cable
Links RaceCapture/Pro to the Dual powered CAN hub Passes two CAN bus networks to the Dual CAN hub (sold separately) RJ45 connection to RaceCapture M8 connection to Dual CAN Hub 1 Meter length Full Harness Specifications
MSRP:Was:Now: $25.95 -
Autosport labs
CAN bus extension cable
Single Channel CAN bus extension cable. Used to link a CAN-enabled device to the RaceCapture system. M8 Male to M8 female Single CAN bus channel Supports up to 1MB data rate Available in multiple lengths. Multiple cables can be linked end-to-end. 0.5...
MSRP:Was:Now: $21.95 - $28.95