AnalogX – 4 channel Analog to CAN bus interface

Features

Analog sensor input voltage range:

0 - 5v

DAC resolution:

12 bit SAR

Sample output format:

0 - 5000mV

Input impedance:

Greater than 10 Meg Ohm

Input voltage protection:

100v

CAN baud rate:

1M and 500K, jumper configurable

Address Space:

4 separate address spaces allows up to 4 AnalogX modules to operate on the same CAN network. (DIP switch configurable)

Power input and connections:

9 - 15volts, protected to 40v (intermittent)

Harness:

M8 4P Male for power + ground, M8 8P for sensor connection

Weight:

100gm (approximately)

Dimensions:

60 x 60 (approximately)

Environmental:

IP65, 0-85C

Product Overview

AnalogX is a compact 4 channel analog to CAN bus I/O expander, ruggedized and hardened for automotive and industrial applications.

Features

AnalogX provides 4 buffered and protected 0-5v sensor inputs, broadcasting sensor values between 1 and 255Hz. A 0.5A 5v reference is also provided for powering sensors.

Features at a high level:

Rugged and sealed Industry-standard M8 connectors for CAN/Power and sensors
Compact and environmentally protected design; IP65 rating
Compatible with our plug and play harness system (cables available separately) – 60 x 60 x 24mm / 100gm

Full specifications

View the full specifications and installation guide

Compatible with our plug and play system

AnalogX2 is compatible with our plug and play harness system, allowing you to simply plug a system together all the way from RaceCapture to individual sensors. Use the Powered 8 port dual CAN bus hub (available separately), to provide power and pass data to RaceCapture, and enable future expansion for other devices.

Compatible Plug and Play harness accessories

For a full plug and play installation, these parts are available separately:

Powered 8 port dual CAN bus hub
CAN bus extension cable (available in multiple lengths)
RaceCapture RJ45 integration cable
Quad Sensor Expander
Single channel sensor extension cable (available in multiple lengths)
10 bar / 150 PSI pressure sensor with plug and play harness
150 bar / 2175 PSI pressure sensor with plug and play harness
-40 to 150C linear temperature sensor with plug and play harness
Single channel sensor pigtail

Bare pigtails for custom installation

If you need a custom installation, bare wire pigtails are also available for CAN/power and sensors, or you can source your own industry standard M8 connectors.