Ecumaster
- Accessories
- Application Specific Plug and Play Adapters
- Application Specific Plug in Standalone ECUs
- Digital Dash Displays
- EMU PRO
- Flying Lead Harnesses
- Piggyback Engine Management
- Power Management
- Standalone ECUs
-
Ecumaster
Flat Response Knock Sensor Kit - M8
WHP wideband knock sensor kits are designed to take advantage of the sophisticated knock detection circuits in many modern ECUs, such as the ECUMaster EMU. The knock processing chip in the EMU is...
MSRP:Was:Now: $85.00 -
Ecumaster
Intake Air Temperature Sensor Kit
WHP Air Temperature Sensor Kits are perfect for vehicles using the EMU standalone that are not equipped from the factory with an intake air temperature sensor or have removed the factory MAF and need...
MSRP:Was:Now: $49.00 -
Ecumaster
3/8 Quick Release to -6 Male adapter, black
Adapter for quick release 3/8 fuel fittings to -6 AN male, Black. Note: these are sold individually and not as pairs.ÂÂ
MSRP:Was:Now: $10.00 -
Ecumaster
Connector and terminals for Bosch 4.9
WHPWB493 is a connector, terminals, and wire seals for a Bosch 4.9 Wideband Oxygen Sensor. A 4.9 sensor may only be used with the EMU Black (EMU Black may be used with either a 4.2 or 4.9 sensor. EMU...
MSRP:Was:Now: $9.00 -
Ecumaster
Connector and terminals for Bosch 4.2
WHPWB423 is a connector, terminals, and wire seals for a Bosch 4.2 Wideband Oxygen Sensor. A 4.2 sensor may be used with both the EMU Classic and EMU Black
MSRP:Was:Now: $9.00 -
Ecumaster
Wideband O2 Kit, Bosch 4.9, connector and terminals
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU Black. Accurate information is vital to engine performance and tuning, and the...
MSRP:Was:Now: $129.00 -
Ecumaster
Wideband O2 Kit, Bosch 4.9, with harness
WHP Wideband Oxygen Sensor Kit – Bosch LSU 4.9 w/Harness FCI SICMA 2.8 Terminals Designed for use with the ECUMaster EMU Black, this kit enables accurate air-fuel ratio monitoring using the...
MSRP:Was:Now: $149.00 -
Ecumaster
Wideband O2 Kit, Bosch 4.2, connector and terminals
WHP Wideband Oxygen Sensor Kits allow you to use the on-board wideband oxygen sensor controller in the ECUMaster EMU. Accurate information is vital to engine performance and tuning, and the Bosch LSU...
MSRP:Was:Now: $129.00 -
Ecumaster
Wideband O2 Kit, Bosch 4.2, with harness
WHP Wideband Oxygen Sensor Kit – Bosch LSU 4.2 w/Harness Designed for use with the ECUMaster EMU Black and EMU Classic, this kit enables accurate air-fuel ratio monitoring using the onboard...
MSRP:Was:Now: $139.00 -
Ecumaster
Flex Fuel Kit with -6 AN Adapters
WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of...
MSRP:Was:Now: $164.00 -
Ecumaster
Flex Fuel Kit for Rubber Fuel Hose
WHP Flex Fuel Sensor Kits are designed for use with aftermarket ECUs capable of reading an ethanol content sensor. The use of a WHP Flex Fuel Sensor with the ECUMaster EMU allows for blending of...
MSRP:Was:Now: $139.00 -
MSRP:Was:Now: $169.00