Ecumaster
- Accessories
- Application Specific Plug and Play Adapters
- Application Specific Plug in Standalone ECUs
- Digital Dash Displays
- EMU PRO
- Flying Lead Harnesses
- Piggyback Engine Management
- Power Management
- Standalone ECUs
-
Ecumaster
MITSUBISHI EVO 7 PNP For EMU BLACK
This plug and play adapter allows an ECUMaster EMU Black standalone ECU to be installed in a Mitsubishi Lancer Evolution 7 with the 4G63T engine, using the factory ECU connectors instead of rewiring...
MSRP:Was: $269.00Now: $242.10 -
Ecumaster
Gen 4 3SGTE Caldina PNP for EMU Black
This plug and play adapter installs an ECUMaster EMU Black standalone ECU in the Gen 4 Toyota Caldina with the 3S-GTE engine. It connects to the factory ECU plugs, which avoids cutting or repinning...
MSRP:Was: $269.00Now: $242.10 -
Ecumaster
Connector and Terminal Kit for ECUMaster EMU Black
This kit contains the mating connectors and terminals for the ECUMaster EMU Black, for building a new engine harness or repairing an existing one. Specifications 1 x black 39-pin connector (custom...
MSRP:Was: $19.00Now: $17.10 -
Ecumaster
Honda OBDI PNP For EMU Black
This plug and play adapter installs an ECUMaster EMU Black standalone ECU in OBD1 Honda and Acura models with a manual transmission. It plugs into the factory ECU connectors, so no rewiring is...
MSRP:Was: $189.00Now: $170.10 -
Ecumaster
MUX Switch Board
The ECUMaster MUX Switch Board is a small resistor board that lets up to three switches share one analog input on an ECUMaster ECU. Each combination of grounded inputs produces a distinct voltage,...
MSRP:Was: $22.00Now: $19.80 -
Ecumaster
Gen 4 3SGTE Caldina PNP for EMU Classic
This plug and play adapter installs an ECUMaster EMU or EMU Classic standalone ECU in the Gen 4 Toyota Caldina with the 3S-GTE engine. It connects to the factory ECU plugs so the original engine...
MSRP:Was: $239.00Now: $215.10 -
Ecumaster
MITSUBISHI EVO 7 PNP For EMU CLASSIC
This plug and play adapter allows an ECUMaster EMU or EMU Classic standalone ECU to be installed in a Mitsubishi Lancer Evolution 7 with the 4G63T engine, connecting to the factory ECU plugs so the...
MSRP:Was: $239.00Now: $215.10 -
Ecumaster
ECUMaster 8 Channel EGT Module
The ECUMaster 8 Channel EGT module (EGT to CAN) reads up to eight K-type thermocouples and sends the temperatures over CAN bus. Paired with an ECUMaster EMU, it lets the tuner watch exhaust...
MSRP:Was: $325.00Now: $292.50 -
Ecumaster
Flying Lead Harness for PMU-16 & PMU-24 - TXL Version
This flying lead harness gives you pre-terminated TXL wires for building a PMU power distribution harness. Each wire is already crimped for the standard (non-Autosport) PMU connector, so you insert...
MSRP:Was: $225.00Now: $202.50 -
Ecumaster
ECUMaster MAP-400
The ECUMaster MAP-400 is a 400 kPa (58 psi) absolute pressure sensor for reading intake manifold pressure on naturally aspirated and boosted engines. It converts absolute pressure to a 0-5 V class...
MSRP:Was: $85.00Now: $68.00 -
Ecumaster
MITSUBISHI EVO 6 PNP For EMU BLACK
This plug and play adapter allows an ECUMaster EMU Black standalone ECU to be installed in a Mitsubishi Lancer Evolution 6 with the 4G63T engine, using the factory ECU connectors instead of rewiring...
MSRP:Was: $269.00Now: $242.10 -
Ecumaster
Connector and Terminal Kit for ECUMaster Dual H-Bridge
This connector and terminal kit provides the mating plug for the ECUMaster Dual H-Bridge module, so you can build your own harness for electronic throttles, electric wastegate actuators, power...
MSRP:Was: $25.00Now: $22.50